Get 10% off this month when you try our services!

The design

Here are some tips

1. Choose a design professional. To create a plan and detailed scope of work, most homeowners hire either an architect or interior designer, and sometimes both. Every company does things a little differently, and design licensing varies in each state. Many designers work on projects that don’t involve major structural work or additions, and also offer assistance with material and color selections. Architects may take on a wide range of work, or work only on floor plans and permits, and leave the details of the electrical plan, baths and kitchen to another designer.

Selecting a design professional usually starts with an in-person meeting, which can take a few weeks depending on how many companies you are interviewing. This is your opportunity to understand the services that each firm offers and make sure they match up with what you are expecting. It’s also critical that you have a budget for your project in mind that you communicate clearly to the firm you hire, so the design can align with what you are planning to invest.


2. Create a plan. After choosing a design firm, it's time to start making a plan. There are usually at least two and sometimes three good ways to reach your design goals.

The plans are called schematic designs; they usually involve a rough layout of the floor plan and some simple views of the exterior of the home if there is an addition. It takes time for the design professional to work these out, and then usually another week or two for the homeowners to consider them and make decisions. If the project is larger or the homeowners want additional changes made to the schematics, this initial design phase can take several months.

 Contractors are frequently brought into the process once a final schematic design has been selected. Usually there is at least a general idea of how the home will look from the outside, a dimensioned floor plan and some preliminary material selections. With this much information, it’s possible to provide preliminary estimates of cost.

Contractors are often asked to estimate the schematic design as part of the interview process. It may take a couple of weeks to set up the interviews and generally at least two to three weeks after interviews to receive the estimates. Altogether it could take four to six weeks to interview candidates and receive estimates. After that you may want to call references, visit jobsites or do additional research before making a decision about the contractor you will hire.

4. Go shopping while others are engineering. Love to shop or hate to shop? This may determine whether you enlist a designer to help with your material selections. Even those who like to shop may be overwhelmed by all the options and want professional input. Do not underestimate the number of things that need to be selected, from doorknobs and windows to countertops and light fixtures. To really keep a handle on your project cost, it’s best to select every last thing ahead of construction. This will allow your contractor to tell you the prices for what you’d like and properly schedule material purchases based on lead times.

Allow yourself one to two months to choose everything. While you are shopping for tile and hardwood floors, your architect or designer will finalize construction drawings, work with a structural engineer on how the project will be built and put in the details required for permitting. If it all goes well, you will work on this step and the previous one concurrently and finish at the same time.

5. Get your permits. Depending on the scope of your project and where it’s located, permitting can take a day, months or even years. You should have some idea ahead of filing for permits about the length of the process, which will allow you to identify a likely start date for your project. Permit fees can range from a few hundred dollars to thousands of dollars, depending on where you live and how big your project is.

6. Ready, set ... With the plan submitted for permits and material selections made, your contractor will be able to finish up pricing and write up a contract for construction. If the selected materials cost more than the budget allows, there may be a round of “value engineering,” which means changing scope of work or materials to reduce cost. By the time the contract is signed, your contractor will have identified the longer-lead items (like cabinets, windows, doors, tile and sometimes plumbing or electrical fixtures) and may even have them on order ahead of the start of construction, depending on the timing of your project.



Welcome

Room Addition


If you’re feeling cramped in what once was enough space, or you have just purchased a new home with the intention of adding rooms or expanding, then it’s time to remodel on a grander scale. Add  room or two. Let your imagination go wild and we’ll help you design – in 3D – the best of it, within your investment range.

We offer options to achieve your growth needs with solutions for both luxury and practical home additions. Take advantage of our extensive knowledge base and many years of design build experience offered by our team. We help evaluate your needs with careful consideration of your investment range and the project time frames, while focusing on you and your needs.

When it comes to your home, which may be one of the largest investments you have, why settle for anything less than outstanding? New Image Construction provides complete, worry free answers and solutions which are guaranteed to deliver!



3D Design
 

Traditionally, most architects and remodeling companies work with two dimensional designs. Although this may be easy for a builder and an architect to decipher, it is not very client friendly. 3D design allows us to clearly show clients what their projects will look like in their finished state. It also allows the clients to see the space with the different materials, finishes, and elements that they have chosen. The 3D design can also be rotated, so clients can see the space from different views and perspectives.

Our 3D Designs have been very effective in helping clients save time and money by showing them exactly what they are getting before the start of a project. It gives us the ability to analyze and measure each component individually; we can also test the stress factors and tolerances of a project before we build. This allows us to keep the projects within the investment range, and also helps the clients make decisions before the start of the projects. The end result is an elegant space, personalized just for you. Because you deserve it.